domhwa.blogg.se - Capello dvd player manual

Once you find the step-by-step instructions to program the remote to work with your DVD or BLU-RAY, use the remote codes included on this page.

You can also check the remote programming instructions included in the packaging of your remote or find a YouTube video for your specific model number remote. To program a Universal or TV remote control: See the links below and find the brand and model of your remote control. If it is determined that the TV requires service, the Sony® eService Web site at can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer.TEVION = 0388 0446 0447 0448 0450 0451 0452

Try replacing the video cable between the DVD player and TV.

pressing and holding the PAUSE button on the front of the DVD player for 5 seconds.

moving the VIDEO OUT switch on the back of the DVD player to the INTERLACED position.

power off the DVD player and press 369 using the number buttons on the remote control, then power back on the DVD player.

pressing the PROGRESSIVE button on the front of the DVD player or P.SCAN button on the remote control to disable the progressive signal.

If you have a Sony DVD player, depending on the model, you may be able to change the output setting to interlaced by doing one of the following: You may need to refer to the instruction manual of your DVD player for specific details about changing from progressive to interlaced scan. If not, the DVD player should be set to output an interlaced signal. IMPORTANT: Some televisions may not be able to display a progressive signal.

Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced.

NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches.

Play a different DVD to determine whether or not the problem is being caused by the disc itself.

NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types.

Ensure the video cable between the DVD player and TV is securely connected to both devices.

Ensure the DVD player is not connected to a VCR due to copyright protection, the picture will not playback properly through a VCR.IMPORTANT: Poor picture quality on a High-Definition Television (HDTV) may be related to the type of signal being received click here for further information.